FFT动态相位重建算法的滤波窗影响分析

为了优化相位重建算法，针对波面干涉图的傅里叶频谱，分析了不同滤波窗口的分布特征和频谱响应，通过计算机仿真和实验测试，确定了FFT动态相位重建算法的最佳滤波窗口类型。其中处理仿真干涉图重建的波面与原始波面的波面峰谷值残差为0.008 5λ，波面均方根值残差为0.000 1λ；处理实验干涉图获得的波面与移相干涉测量法获得的波面峰谷值残差为0.009 3λ，波面均方根值残差为0.000 5λ。结果表明:选取Hamming窗进行滤波处理并重建的相位经拟合后得到的波面较参考波面的面形残差最小，相位重建精度优于0.01λ，可进一步应用于大口径光学元件的测量中。     

Sum rules in multiphoton coincidence rates

We show that sums of carefully chosen coincidence rates in a multiphoton interferometry experiment can be simplified by replacing the original unitary scattering matrix with a coset matrix containing 0s. The number and placement of these 0s reduces the complexity of each term in the sum without affecting the original sum of rates. In particular, the evaluation of sums of modulus squared of permanents is shown to turn in some cases into a sum of modulus squared of determinants. The sums of rates are shown to be equivalent to the removal of some optical elements in the interferometer.     

Sample plug induced peak splitting in capillary electrophoresis studied using dual backscattered interferometry and fluorescence detection

The appearance of unexpected peaks in capillary electrophoresis (CE) is common and can lengthen the time of method development as assay conditions and experimental parameters are varied to understand and mitigate the effects of the additional peaks. Additional peaks can arise when a single-analyte zone is split into multiple zones. Understanding the underlying mechanism of these phenomena, recognizing conditions that favor its presence, and knowing how to confirm and eliminate the effect are important for efficient method optimization. In this study, we examine how the overlap of analyte zones with the sample plug can lead to peak splitting. This is explored experimentally using dual detection CE, which enables both the sample plug and analyte zones to be independently and simultaneously measured from the same detection volume. Simulations performed via COMSOL Multiphysics confirm the origin of the splitting and help guide experiments to reduce and eliminate the effect. Our findings show that this peak splitting mechanism can arise in separations of both small and large molecules but is, especially, prevalent in separations of slowly migrating macromolecules. This effect is also more prevalent when using a short length-to-detector, as is commonly found in microfluidic applications. A simple diffusion-less model is introduced to develop strategies for reducing peak splitting that avoids modifying the apparatus, such as by lengthening the separation length, which can be difficult. Decreasing the sample plug length and slowing the electroosmotic flow can both reduce this effect, which is confirmed experimentally.     

基于二氧化硅胶体晶体薄膜和反射干涉光谱的蛋白冠监测方法

生物分子与纳米材料作用形成的“蛋白冠”影响纳米材料的物理和化学性质, 目前缺少有效的原位实时技术监测蛋白冠的形成过程. 本研究基于二氧化硅胶体晶体薄膜和反射干涉光谱法, 研究了三种代表性血液蛋白质在二氧化硅纳米粒子表面的蛋白冠形成过程, 结果表明这三种蛋白具有不同的蛋白冠形成过程及参数; 研究了人血清白蛋白在三种表面曲率的二氧化硅表面的蛋白冠形成过程, 结果表明曲率越大时, 蛋白冠形成速率越快, 厚度越大. 以血浆和全血样品为生物环境开展蛋白冠形成过程研究, 结果表明本研究的监测方法可以直接用于血浆和全血在纳米粒子表面蛋白冠的形成过程监测, 为纳米材料与生物分子的相互作用研究提供了一种简单可靠的评价技术.     

激光散斑干涉法测量金属复合引线热膨胀系数的实验研究

本文采用激光散斑干涉法测量微电子金属封装用金属复合引线的热膨胀系数。该方法有很高的测量精度和灵敏度,并对试件形状、尺寸和表面无特殊要求。同时利用光学方法全场测量的优点,使用已知热膨胀系数的金属材料作为标准试件,可减少温度场不均匀分布及微小变化对测试精度的影响,消除了测量光路几何参数导致的系统误差。在相对简单的实验设备下,得到较高精度金属复合引线的热膨胀系数值。该方法可广泛用于各种新材料的热膨胀系数的测定。     

双参考光全息—散斑干涉术的原理和实验

本文用统计光学方法对双参考光全息——散斑干涉术进行了详尽的理论分析,给出了全息和散斑干涉场区域平均光强分布与光学系统主要参数及三维变形场各分量之间关系的解析表达式,进而讨论了离面位移和面内位移测量的上、下限,最后还给出了有关的实验结果。     

用曲线大窗口平滑散斑条纹图的方法研究

提出一种计算条纹方向的简单算法,以及通过条纹方向图获得沿条纹方向的曲线窗口并对散斑条纹图进行曲线大窗口滤波的方法．实验表明此方法较好地消除了散斑条纹图的噪声,同时尽量减小了对条纹结构的损害．为从单幅散斑条纹图中应用条纹中心线法或全灰度法进一步提取相位场的后处理,奠定了良好的基础．     

Study on Deformation of Polycrystalline Aluminum Alloy Using Moiré Interferometry

Polycrystalline aluminum alloy is manufactured by annealing, compared to the width of the specimen, the size of the grains can not be omitted, which makes the specimen anisotropic. Under uniaxial tension, the deformation field is inhomogeneous. In this study, moiré interferometry is successfully applied to measure the deformation of the polycrystalline specimen. The experimental results presented the stress versus strain responses of the marked grains in different orientations and different shapes. By using fringe centering method, the strain distributions under certain load in the centers and on the boundaries of the grains are analyzed.     

Holographic interferometric investigation of shock wave interaction with a ramp

The internal flowfield including shock reflections structure inside a 2-D half inlet model was examined by a double exposure holographic interferometry using a Q-switched pulse laser. The interferograms give detailed flow visualization pictures. The structures of regular reflection, lambda reflection and Mach reflection in the inlet channel were observed. From the analysis of fringe patterns, the quantitative distributions of flow density, pressure and Mach number of the internal flowfield have been reconstructed. The boundary layer thickening and separation in the case of lambda reflection and the Mach stem in the case of Mach reflection were clearly demonstrated in the holographic fringe patterns. The results show that the shock interacitons with the ramp and the wall introduce a complicated flow structure which could strongly affect the efficiency of the inlet.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

MEASUREMENT OF NON-UNIFORM RESIDUAL STRESSES BY COMBINED MOIRE INTERFEROMETRY AND HOLE-DRILLING METHOD： THEORY, EXPERIMENTAL METHOD AND APPLICATIONS

Hole-drilling method is one of the most convenient methods for engineering residual stress measurement. Combined with moiré interferometry to obtain the relaxed whole-field displacement data, hole-drilling technique can be used to solve non-uniform residual stress problems, both in-depth and in-plane. In this paper, the theory of moiré interferometry and incremental hole-drilling (MIIHD) for non-uniform residual stress measurement is introduced. Three dimensional finite element model is constructed by ABAQUS to obtain the coefficients for the residual stress calculation. An experimental system including real-time measurement, automatic data processing and residual stresses calculation is established. Two applications for non-uniform in-depth residual stress of surface nanocrystalline material and non-uniform in-plane residual stress of friction stir welding are presented. Experimental results show that MIIHD is effective for both non-uniform in-depth and in-plane residual stress measurements. The project supported by the FRAMATOME ANP